Solar power plants can last 40 years or more

Did you know that when a solar power plant is built, it's usually backed by a power purchase agreement with a customer that lasts 20 to 25 years. But that doesn't mean such plants will be worthless two decades later. Not only will solar panels last 40 to 50 years, but the infrastructure around a solar power plant has a lot of value. Solar panels could be replaced with new, more efficient modules at relatively low cost, thus improving performance, but once a site is established and the infrastructure is built, a  solar power plant has a very long effective lifespan.

Solar power is the most Abundant energy source on earth

Did you know that there's enough solar energy hitting the earth every hour to meet all of humanity;s power needs for an entire year.   Every ounce of oil, every lump of coal, and every cubic foot of natural gas could be left in the ground if only we could capture one hour's worth of solar energy each year.   That's the scale of the opportunity.   To put it into a different perspective, if we covered the Mojave Desert with solar arrays, it would generate more than twice as much electricity as the U.S. uses annually.

Transformers

Did you know that a transformer is an electrical device which changes or transforms an alternating current (AC) signal form A high voltage transformer. The device typically consists of 2 sets of insulates wire,coiled around a common iron core. Electrical power is applied to one of these coils called the primary coil, and then is magnetically transferred to the other coil.Because the two coils of a transformer are very close to each other, an electric current through the primary coil generates a magnetic field which is also around the secondary coil.

Airport Solar Farms Improve Air Quality, Reduce Emissions.

The Metropolitan Washington Airports Authority is conducting a study with the Domain energy Virginia on the usability of building a large scale 100-megawatt solar energy project. It's planned to be completed in 2023. The Dulles solar farm would take up approximately 1,200 acres and connect to Dominion Energy's transmission line. The solar project could power 25,000 homes at peak input.

Nation's Largest Municipal Solar Project Underway.

According to Electrical Contractor magazine Cincinnati released details of a plan to build the largest municipal solar array in the Unites States. The project will be able to provide enough electricity to power 25,000 homes everyday. The project will be installed 40 miles east of Cincinnati's downtown ans said to to take up approximately 1,000 acres and contain more than 310,000 solar panels.

How American Businesses are Leading the Way in Green Building Technology

See how U.S. companies made the Shanghai Tower a shining example of green building. | Graphic by Matty Greene, Department of Energy.

In 2014, two daredevils broke into a construction site and climbed to the top of the second tallest building in the world: the Shanghai Tower. You may recognize it from their vertigo-inducing viral video, which leaves no doubt that the Tower is tall. What it doesn’t show is how much American businesses have had an impact on making the structure one of the greenest large buildings in the world.

Green buildings are more sustainable than conventional buildings by using fewer building materials, conserving energy and reducing waste. Thanks in large part to technologies from U.S. companies (and compared to conventional technologies) the approaches used in the Shanghai Tower:

• Reduce energy use by 21 percent
• Reduce water consumption by 40 percent
• Reduce the building’s carbon footprint by 34,000 metric tons per year, equivalent to taking more than 7,000 cars off the road.

From the architectural design and landscaping to temperature control and lighting, U.S. companies have made significant contributions to the Tower’s green design, which has earned a LEED Gold rating, as well as a China Green Building Three Star rating. Take a look at the graphic above to see some examples.

The Tower exemplifies how U.S. technology can drive economic growth while reducing carbon emissions, a path critical to addressing global climate change. As Secretary Moniz said in a recent speech, “Ultimately our focus is on the solutions to the climate-change challenge through technology. … American business will be called upon here to do the heavy lifting.”

That’s why 24 American companies are in China right now, joining Secretary of Commerce Penny Pritzker and Deputy Secretary of Energy Elizabeth Sherwood-Randall for a joint trade mission focused on smart cities and green infrastructure. The trip aims to follow through on the climate change goals laid out by President Obama and President Xi last November.

The Shanghai Tower is just one shining example of how U.S. companies are leading the way in green building technologies. In Shanghai and around the world, American innovation is scaling new heights when it comes to sustainability.

Pat Adams

Digital Content Specialist, Office of Public Affairs

Energy Storage May Already Make Sense for Many Commercial Customers

Seth Mullendore 
May 12, 2015  |  

In the wake of Tesla’s recently announced entrance into the stationary energy storage market, there has been a wave of analysis of what this might mean for residential and commercial utility customers. The bulk of the headlines have centered on the sleek residential Powerwall, but far fewer have investigated the implications of Tesla’s commercial-scale product, the Powerpack. In a new report, titled US Solar & Alternative Energy: The Real Battery Storage Opportunity, the global financial research company UBS sees commercial and industrial (C&I) customers as the market opportunity for Tesla and other energy storage companies.

According to the report, the reason why residential systems may not offer as many economic benefits at this time, while C&I systems have the potential to net a positive return, has to do with how each customer segment is billed for its respective electricity use. Residential utility customers are billed based solely on the volume of electricity consumed, measured in kilowatt-hours (kWh). Commercial customers are also billed on a volumetric basis, but in addition, they pay a demand charge, a fixed charge calculated on the highest magnitude of electricity used each billing period, measured in kilowatts (kW). Demand charges can be significant, accounting for 35-40 percent of a C&I customer’s electricity bill in some parts of the country.

This maximum level of electricity demand is known as peak demand. By selectively discharging when a customer’s level of demand reaches a certain kilowatt threshold, energy storage can act to effectively cap peak demand — a process called peak shaving. The process is all managed through intelligent control system software, which can learn a building’s energy use trends over time to optimize energy storage performance accordingly. Reduced peak demand translates into fewer demand charges and lower customer utility bills.

So, residential customers do not pay demand charges, while commercial and industrial customers do. And it is in those demand charge markets where commercial battery storage will likely make the first foray — because reducing those charges is a straight economic play with a good rate of return. In fact, UBS estimates that energy storage as a way to reduce these demand charges is already economical in several U.S. markets, including parts of California and New York City.

The UBS report models the 20-year internal rate of return (IRR) for an energy storage system costing $400 per kWh, a price point UBS predicts will be reached by 2018. Tesla’s Powerpack is already approaching this target at about $50,000 installed cost for a 100 kWh system, or $500 per kWh. The report finds that energy storage systems begin to show a positive IRR at a demand charge of around $10 per kW. At a demand charges of $16 per kW, the IRR comes in at about 7 percent. A $20 per kW demand charge produces a return of about 12 percent. Demand charges in certain California and New York markets are already in the $30-$40 per kW range, meaning the economics are likely to be favorable even at today’s energy storage prices.

UBS goes on to note that additional value propositions, such as payments for participation in ancillary services and demand response programs, can further improve the economic argument in favor of energy storage.

One component that UBS fails to quantify, or even mention for C&I customers, is that energy storage systems can be set up to island, or disconnect from the grid, in the case of a grid outage. When islanded, energy storage can provide backup power for customers, allowing them to continue operations when the grid is down. While energy storage systems designed for demand charge reduction or ancillary services may not be able to power all of a facility’s systems throughout a power outage, they can certainly take on a reduced or critical load, augmenting the capabilities of existing backup generators and extending the lifetime of onsite fuel supplies during extended outages. When combined with solar power, a storage system could theoretically supply resilient power to critical loads for an unlimited duration.

In comparison to C&I customers, the UBS report finds that residential customers will have less financial incentive to purchase energy storage systems. UBS specifically examines the case of batteries for backup power as compared to fossil-fueled generators. Though the numbers for residential storage look less favorable as an alternative to natural gas generators, UBS fails to look beyond economics alone. The fact is, lithium-ion batteries offer a lot to like as opposed to generators. Generators can be ugly, noisy, and polluting, they are limited by available fuel supplies; and they emit carbon monoxide, a dangerous gas that can be fatal if not properly vented.

Lithium-ion batteries have no emissions, are quiet, and while looks aren’t everything…have you seen the new Tesla battery yet?

Lead image: Light bulbs. Credit: Shutterstock.

Solar Ready Vets: Preparing Our Veterans to Join the Growing Solar Workforce

The transition from military service into the civilian workforce can be a vulnerable moment.

Many veterans indicate that finding a job is one of the greatest challenges they face in their return to civilian life, and one aspect of that challenge is translating military skills and experience in a marketable way for civilian employers.

At the Department of Energy, we like to say we’re solutions people. And there is a great opportunity here to help by connecting our talented veterans with a dynamic sector in our economy that needs them. Solar electricity generation doubled last year alone, and the solar industry is adding jobs 10 times faster than the rest of the economy. That’s why the Department of Energy and the Department of Defense joined forces to create the Solar Ready Vets program, which provides training to help military personnel translate and build on their skill sets and transition to careers in this thriving renewable energy field.

http://energy.gov/articles/solar-ready-vets-preparing-our-veterans-join-growing-solar-workforce-0

HOW DO WIND TURBINES WORK?

#DidYouKnow a #wind turbine works like the opposite of a fan? Instead of using electricity to make wind, wind turbines use wind to make electricity. The wind turns the blades, which spin a shaft, which connects to a generator and makes electricity to power homes and businesses. Learn more about how wind turbines work ⇢

http://www.energy.gov/eere/wind/how-do-wind-turbines-



U.S. Department of Energy

Amazing New Solar Panels Are Completely Transparent

Just so we’re totally clear, this is a huge deal. (Get it?)

posted on Aug. 27, 2014, at 3:51 p.m.

Kasia Galazka

BuzzFeed Staff

http://www.buzzfeed.com/kasiagalazka/transparent-solar-panels#.ou6byrdMk

Wind Vision Report from the U.S. Dept. of Energy

With utility-scale turbines installed in nearly every state, wind is already a major source of clean, domestic power for the nation. But what if wind supplied 35 percent of the country's electricity by 2050? That's one of the scenarios highlighted in our new ‪#‎WindVision‬ report, a detailed roadmap for America's wind energy future. Learn more: http://go.usa.gov/3aHGF

Program to Help Businesses Save Energy

http://www.ppulse.com/Articles-The-Green-Page-c-2015-02-26-120299.114136-Program-to-Help-Businesses-Save-Energy.html

February 27, 2015

Businesses have an opportunity to save energy and reduce operating costs by participating in Focus on Energy's Business Incentive Program (BIP) and Renewable Energy Competitive Incentive Program (RECIP). Focus on Energy, Wisconsin utilities' statewide program for energy efficiency and renewable energy, is proud to offer cash-back incentives and technical expertise to energy-intensive businesses like Capital Brewery.

Middleton-based Capital Brewery was founded in 1984 and has been brewing beer since 1986. The company worked with Focus on Energy and their utility, Madison Gas & Electric (MG&E), to complete two projects, including the installation of a 13 kW solar photovoltaic (PV) system and the installation of a high efficiency heat recovery system with controls. These equipment installations are helping the brewery save more than 19,000 kWh and 4,000 therms, resulting in a savings of more than $4,500 annually on their utility bill.

"It was the incentive and technical expertise from Focus on Energy that motivated us to do these projects," said Scott Weiner, president of Capital Brewery. "Capital Brewery is committed to sustainably brewing world class lagers and ales. We look forward to continuing our work with the Focus on Energy team and reducing our water and energy consumption as well as our carbon footprint."

"Breweries are a significant part of the industry and culture in Wisconsin," said Tamara Sondgeroth, director of operations for Focus on Energy. "By helping breweries make smart equipment choices combined with financial incentives, we are able to trim costs and help these businesses become more sustainable."

From lighting, to heating and cooling, and refrigeration systems, Focus on Energy offers both custom and prescriptive incentives to qualifying businesses. For more information on Focus on Energy's business programs, call 800.762.7077 or visit our focusonenergy.com.

Small Towns Achieve Big Savings with Lighting Upgrades

                             A worker installs energy efficient lights as part of the Smart Lights for Smart Cities program. | Photo courtesy of Mid-America Regional Council.

Crystal McDonald

Project Officer, Department of Energy.

                             

Dozens of small communities throughout Kansas and Missouri are saving big money and energy as a result of several high-impact lighting projects. Over the past three years, more than 5,700 energy-efficient lights were installed in communities with populations of less than 35,000 people. The new streetlights are expected to save 25 cities and towns a combined $25 million in energy costs and slash carbon emissions by more than 380 million metric tons, equivalent to removing 80 million cars off the road in one year. The upgrades were part of Smart Lights for Smart Cities, an energy efficiency initiative managed by the Mid-America Regional Council, a metropolitan planning organization serving the Kansas City area. The new lights—featuring induction and LED technologies—are brighter, more energy efficient, and easier to maintain than the mercury vapor and high-pressure sodium streetlights they replaced.

Building on support from an Energy Efficiency and Conservation Block Grant (EECBG) via the Recovery Act, Mid-America Regional Council became a charter member of the Energy Department’s new Better Buildings High-Performance Outdoor Lighting Accelerator. Better Buildings Accelerators bring together public and private sector leaders and experts to solve some of the nation’s toughest energy challenges.

The High-Performance Outdoor Lighting Accelerator works with state and local municipalities nationwide to increase the adoption and use of high efficiency outdoor lighting in the public sector. Key program areas are replacing more than 500,000 outdoor lighting poles and developing best practice approaches to municipal system-wide upgrades.

An increasing number of states and municipalities are turning toward high efficiency outdoor lighting. There was nearly a two-fold increase of LED installed stock in outdoor applications from 2012 to 2013. New high performance lighting technologies offer approximately 50% energy savings and cost savings with lower operations and maintenance due to a longer lifespan. The cost savings is significant as outdoor lighting costs across the U.S. total approximately $10 billion a year.

Learn more about EECBG and The High-Performance Outdoor Lighting Accelerator.

Energy Efficient Upgrades - Lighting

Lighting is a critical component of every small business. Employees must be able to see to perform their jobs, and objects and spaces must be aesthetically pleasing to encourage sales.

Depending on the type of business you operate, lighting accounts for 20% to 50% of electricity consumption. This means that significant cost savings can be achieved with energy-efficiency improvements, and due to continually improving equipment, lighting usually provides the highest return-on-investment of major upgrades.

https://www.sba.gov/content/lighting

Fact or Fiction – LEDs don’t produce heat

http://www.ledsmagazine.com/articles/2005/05/fact-or-fiction-leds-don-t-produce-heat.html

Find Financing for Energy Efficient Upgrades

http://www.energy.gov/eere/buildings/find-financing-energy-efficiency-upgrades

New programs from Focus on Energy!!

Contact us to reduce your energy costs today!



https://focusonenergy.com/business/businessprogramupdates

Top 6 Things You Didn't Know About Solar Energy

This article is part of the Energy.gov series highlighting the "Top Things You Didn't Know About..." series. Be sure to check back for more entries soon. 6. Solar energy is the most abundant energy resource on earth – 173,000 terawatts of solar energy strikes the Earth continuously. That's more than 10,000 times the world's total energy use. 5. The first silicon solar cell, the precursor of all solar-powered devices, was built by Bell Laboratories in 1954. On page one of its April 26, 1954 issue, The New York Times proclaimed the milestone, “the beginning of a new era, leading eventually to the realization of one of mankind’s most cherished dreams -- the harnessing of the almost limitless energy of the sun for the uses of civilization.” 4. The space industry was an early adopter of solar technology. In the 1960s the space industry began to use solar technology to provide power aboard spacecrafts. The Vanguard 1 -- the first artificial earth satellite powered by solar cells -- remains the oldest manmade satellite in orbit – logging more than 6 billion miles. 3. Fast track to today and demand for solar in the United States is at an all time high. In the first quarter of 2012, developers installed 85 percent more solar panels compared to the first quarter of last year. Total U.S. installations may reach 3,300 megawatts this year – putting the country on track to be the fourth largest solar market in the world. 2. As prices continue to fall, solar energy is increasingly becoming an economical energy choice for American homeowners and businesses. Still, the biggest hurdle to affordable solar energy remains the soft costs – like permitting, zoning, and hooking a solar system up to the power gird. On average local permitting and inspection processes add more than $2,500 to the total cost of a solar energy system. The Energy Department SunShot Initiative works to aggressively drive down these soft costs – making it faster and cheaper for families and businesses to go solar. 1. In California’s Mojave Desert, the largest solar energy project in the world is currently under construction. The project relies on a technology known as solar thermal energy. Once the project is complete 350,000 mirrors will reflect light onto boilers. When the water boils, the steam turns a turbine, creating electricity. The project is expected to provide clean, renewable energy for 140,000 homes and is supported by an Energy Department loan guarantee. More details on the Energy Department’s investments in large scale, innovative renewable energy projects in this slideshow. Want more solar? The National Renewable Energy Laboratory, Energy Information Administration, and Solar Energy Technologies Program are all great solar energy resources – for kids and adults alike.

40 Facts About Solar Energy - Conserve Energy Future

40 Facts About Solar Energy - Conserve Energy Future

LEDs: Lighting The Way To Major Energy Savings

LEDs: Lighting The Way To Major Energy Savings Eric Savitz Eric Savitz , Forbes Staff Guest post written by Chuck Swoboda Chuck Swoboda is CEO of Cree, which makes LEDs and LED lighting products. Chuck Swoboda President Obama set what he considers an ambitious goal for reduced energy consumption during his State of the Union address Tuesday night: “Let’s cut in half the energy wasted by our homes and businesses over the next twenty years.” Why wait so long? The technology and economics to achieve much of this goal exist today. One of the most antiquated devices wasting power in your home right now is the light with which you’re reading this article. Your incandescent bulb is based on technology that is more than 130 years old, a light source that converts most of the bulb’s energy to heat rather than light. American companies that build lighting based on modern technology – LEDs (Light Emitting Diodes) – can enable consumers to save money and slash their electricity usage for lighting by as much as 80 percent. Today. That change can achieve much of the President’s goal since lighting accounts for nearly one-fifth (19 percent) of electricity spending in the average household, according to the U.S. Department of Energy. As consumers, we already rely upon LED lights in our cell phones and HDTVs. The barrier to the widespread use of efficient LEDs for lighting has been the high upfront cost of LED fixtures and bulbs. But now advancements in technology are dramatically lowering prices, so much so that a sub $10 LED bulb, which delivers brilliant, high quality light for more than a decade could soon be a reality. LED lighting is already cost effective – extremely so – for businesses and municipalities. The City of Los Angeles is saving $5.3 million annually thanks to the Green LA initiative that has thus far replaced 114,000 high-pressure sodium street lights with LED lighting, the nation’s largest such project. Once completed, Los Angeles anticipates LED lighting will save taxpayers $10-million-a-year, nearly two-thirds of what the city had been paying for lighting its streets. Sheetz, the convenience store and gas station chain, ranked 61st on Forbes Magazine’s List of America’s Largest Private Companies, has installed LED interior and exterior lighting at more than 130 of its locations across six states. The energy savings: 45 percent on interior lighting, and as much as 55 percent on exterior lighting that illuminates Sheetz’s gas pumps. As expenses drop, LED lighting is helping boost top-line growth, according to Sheetz, which reports customers find the brighter facilities more visually appealing and perceive them as safer. Such examples explain why LEDs accounted for 8 percent of the U.S. lighting market in 2012, according to McKinsey & Co., primarily in street lighting, retail and office environments. Now it’s the consumer’s turn. Fundamental advances in LED semiconductor technology, optics, and lighting system design now enable LED lights to break century old cost and performance barriers that have prevented consumers from realizing the savings businesses and municipalities already enjoy. While a typical incandescent bulb uses 60 watts of power to generate light, the current state of LED technology can produce the same light for less than 10 watts. A better, more efficient product means less expensive light. To a consumer, this means saving money – significant amounts of money. As the cost factor shrinks, adoption of LED lighting climbs. The industry’s current rate of cost reduction could result in a doubling of LED lighting adoption over the next year. The shorter the payback on the upfront expenditure, the more likely consumers will choose LED lighting. We’ve already seen this trend in commercial lighting markets. As we approach price parity with traditional lighting, any remaining barriers for commercial and consumer adoption should continue to diminish, and we believe the rate of adoption will accelerate. Not only does this trend result in better lighting that saves Americans money and time (imagine not changing a bulb for more than a decade), but it will also eliminate a tremendous amount of physical waste. According to IMS Research, collectively, 5.6 billion bulbs light American households and businesses, including 4.2 billion incandescent bulbs and about 1 billion compact fluorescent (CFL) bulbs that contain toxic mercury. More than 1 billion new bulbs are purchased every year. The President’s own U.S. Department of Energy predicts the switch to LED lighting over the next two decades could save $250 billion in energy costs. There’s no need to wait.

Lumens are the New Watts

Using lumens as the measure of a light bulb’s brightness will simplify shopping for light bulbs… By EARTHEASY.COM Posted AUG 17, 2011 Back in the old days, when there was only one basic type of light bulb consumers could buy, (the incandescent bulb descended from Edison’s original) we could rely on the term “watts” to help us choose the right bulb for our lamps and outdoor lights. Although “watts” refers to how much energy a bulb will use when lit, we understood the relative brightness levels between 60-watt, 100-watt or 150-watt light bulbs. Then along came the energy-saving CFL bulbs A 15-watt CFL bulb, according to the package, produced the equivalent light of a 60-watt incandescent. A 25-watt CFL was comparable to a 100-watt incandescent in light output. And so forth. Shoppers were expected to understand the wattage conversions of these strange looking new CFL light bulbs. LED bulbs, more efficient than CFLs, use even less wattage to achieve desired brightness levels As we gradually got used to the idea of the CFL bulbs and began to understand how to choose the right CFL for our lighting needs, the new LED bulbs came into the mix. Originally used for small task lights such as flashlights and instrument lights, LED technology has evolved rapidly with new LED bulbs available for most applications in the home. LED bulbs, more efficient than CFLs, use even less wattage to achieve desired brightness levels. A 6-watt LED is equivalent to a 15-watt CFL which is equivalent to a 60-watt incandescent bulb. It’s getting confusing isn’t it? And besides three different wattage equivalents for the three basic types of light bulbs on store shelves, there are new halogen incandescent bulbs, new LED tube lights, and terms like Coloring Rendering Index (CRI) and Correlated Color Temperature (CCT) which further describe characteristics of light quality from a bulb. the FTC has mandated packaging changes for all light bulbs, effective in 2012, which simplify and standardize the differences in light bulb output To help shoppers make sense of the many choices in lighting today, the FTC has mandated packaging changes for all light bulbs, effective in 2012, which simplify and standardize the differences in light bulb output. Wattage is no longer a reliable way to gauge a light bulb’s brightness. Lumens, the measure of a bulb’s actual brightness, is the new standard for comparing light bulbs of all types. Lumens, the measure of a bulb’s actual brightness, is the new standard for comparing light bulbs of all types Lumens measure brightness. A standard 60-watt incandescent bulb, for example, produces about 800 lumens of light. By comparison, a CFL bulb produces that same 800 lumens using less than 15 watts. But you don’t need to understand yet another conversion. It’s simple. The more lumens, the brighter the bulb. You can use lumens to compare the brightness of any bulb, regardless of the technology behind it, and regardless of whether it’s a halogen incandescent, CFL or LED. Using lumens helps you compare “apples to apples” when you shop for light bulbs. Once you know how bright a bulb you want, you can compare other factors, like the yearly energy cost.

http://energy.gov/articles/top-8-things-you-didn-t-know-about-leds

There is still time to cash in on incentives from Focus on Energy. Please consider us for all your lighting needs.
https://focusonenergy.com/business/efficient-equipment/lighting

Rural Energy for America Program - Renewable Energy System and Energy Efficiency Improvement Guaranteed Loan and Grant Program

The Rural Energy for America Program (REAP) provides financial assistance to agricultural producers and rural small businesses in rural America to purchase, install, and construct renewable energy systems; make energy efficiency improvements to non-residential buildings and facilities; use renewable technologies that reduce energy consumption; and participate in energy audits, renewable energy development assistance, and feasibility studies.

http://www.rurdev.usda.gov/BCP_ReapResEei.html

What will lighting systems look like in 2020?

According to Greg Merritt, Vice President, Marketing, Lighting at Cree, Inc., "Every lighting solution will be LED, and every lighting solution will offer some type of automated intelligence. More contractors and even distributors will develop their own design and specifying capabilities."
Electrical Contractor Magazine 10/14